DTF Print 300 DPI Converter
Your PNG says 72 DPI, so your RIP drops a 12-inch chest print onto the gang sheet at 50 inches. Set it to 300 DPI and it lands at the size you designed — transparency intact.
300 DPI won't fix low-res art
If a customer sends a 600 px logo, setting 300 DPI just tells the RIP it's 2 inches wide. For a full front print (about 12 in), you need around 3600 px across. Get a bigger file or vectorize it — then set DPI here.
Prepping a whole gang sheet's worth of designs?
Bulk DPI Changer — first 5 free →DTF Transfer Sizes at 300 DPI
Typical apparel print placement sizes used across commercial DTF print shops, and the exact pixel dimensions required at 300 DPI:
| Placement | Typical print width | Pixels across at 300 DPI |
|---|---|---|
| Left chest / pocket | 3.5–4 in | 1050–1200 px |
| Hat front | 4–4.5 in | 1200–1350 px |
| Youth front | 8–10 in | 2400–3000 px |
| Adult front / back | 11–12 in | 3300–3600 px |
| Oversized back | 13–15 in | 3900–4500 px |
| 22 in gang sheet (full width) | 22 in | 6600 px |
Gang sheet planning note: A 22 × 60 inch transfer film roll requires a 6600 × 18000 pixel canvas at 300 DPI. If your individual graphic elements are tagged at 72 DPI, RIP software will place them oversized on the film until corrected.